Forced Performance Black HTZ Turbo 84mm Cover w/ 8cm Hot Side and Internal Wastegate 2002-2007 WRX / 2004-2021 STI

The FP Black turbocharger for the Subaru WRX/STI features the 82mm HTZ compressor section with our 84MM Flow Advancement Port compressor cover coupled to the 8cm2 or 10cm2 turbine section. This combo nearly maxes out the stock location possibilities on this platform. The FP Black flows 71LB a minute and is capable of producing upwards of 575WHP.

In the past we have sold two different types of oil lines. They were known as Type 1 or Type 2, and it was too easy to get confused as to the type needed due to various model differences across the years. To solve this problem, we developed a new oil feed line that includes the parts for both Type 1 and Type 2 cars. The installation instructions below will show which parts to use based on which type of car you have, which is why we are still using the Type 1 and 2 designators.

Subaru Oil Feed Line Install

Subaru OIl Line PSA

Features:

• Compressor wheel – 82HTZ
• Flow rating – 71LB per minute
• CW Measurements – 59.1MM Inducer / 82MM Exducer
• TW Measurements – 67.3MM Inducer / 58.8MM Exducer
• Compressor Housing – 84MM FAP Cover
• Turbine Housing – FP 8CM
• CHRA – FP Journal Bearing
• Oil Line – Included

Notes:

• 84MM Cover Requires TGV Delete to fit in the stock location